Intro to RF – EEs Talk Tech Electrical Engineering Podcast #21

We sit down with Phil Gresock to talk about the basics of RF for “DC plebians.” Learn about RF designs, radio frequencies, RADAR, GPS, and RF terms you need to know in today’s electrical engineering podcast!

 

Agenda:

RF stands for radio frequency

00:40 Phil Gresock was an RF application engineer

1:15 Everything is time domain, but a lot of RF testing tools end up being frequency domain oriented

2:15 Think about radio, for example. A tall radio tower isn’t actually one big antenna!

3:50 Check out the FCC spectrum allocation chart

4:10 RF communication is useful when we want to communicate and it doesn’t make sense to run a cable to what we’re communicating to.

4:50 When you tune your radio to a frequency, you are tuning to a center frequency. The center frequency is then down converted into a range

6:30 Check out Mike’s blog on how signal modulation works:

7:00 Communication is just one use case. RADAR also is an RF application.

8:10 The principles between RF and DC or digital use models are very similar, but the words we use tend to be different.

Bandwidth for oscilloscopes means DC to a frequency, but for RF it means the analysis bandwidth around a center frequency

9:22 Cellular and FCC allocation chart will talk about different “channels.”

Channel in the RF world refers to frequency ranges, but in the DC domain it typically refers to a specific input.

10:25 Basic RF block diagram:

First, there’s an input from an FPGA or data creating device. Then, the signal gets mixed with a local oscillator (LO). That then connects to a transmission medium, like a fiber optic cable or through the air.

Cable TV is an RF signal that is cabled, not wireless.

Then, the transmitted signal connects to an RF downcoverter, which is basically another mixer, and that gets fed into a processing block.

13:50 Tesla created a remote control boat and pretended it was voice controlled.

15:30 Does the military arena influence consumer electronics, or does the consumer electronics industry influence military technology?

16:00 GPS is a great example of military tech moving to consumer electronics

17:00 IoT (internet of things) is also driving a lot of the technology

18:00 The ISM band is unregulated!

19:15 A router uses a regulated frequency and hops off the frequency when it’s being used for emergency communications

20:50 RADAR, how does it work?

22:22 To learn more about RF, check out App Note 150 here:

http://www.keysight.com/main/editorial.jspx?cc=US&lc=eng&ckey=459160&id=459160&cmpid=zzfindappnote150

 

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s